Next Issue: Wipers not returning to base!
#1
Next Issue: Wipers not returning to base!
Hi,
87 k5.
I think i even researched this on another blazer i used to own...
Wipers work fine, all speeds work great. However....
When i turn them off they stay where i stopped them, which forces me to try to stop them at the lowest position all the time....
If i remember there is a ground issue somwhere thats failing to engage the returning thingie...... any hints would be great......
Thanks!
// Jonas
87 k5.
I think i even researched this on another blazer i used to own...
Wipers work fine, all speeds work great. However....
When i turn them off they stay where i stopped them, which forces me to try to stop them at the lowest position all the time....
If i remember there is a ground issue somwhere thats failing to engage the returning thingie...... any hints would be great......
Thanks!
// Jonas
#4
Updating...
So it turned out my connector on the wipermotor is different.
I have 2 connectors,
1 with 2 pins that i think is the controller for the pump.
1 with 3 pins that controls the wiper speed...
Dont really know where to look next ) any tips?
So it turned out my connector on the wipermotor is different.
I have 2 connectors,
1 with 2 pins that i think is the controller for the pump.
1 with 3 pins that controls the wiper speed...
Dont really know where to look next ) any tips?
Thread
Thread Starter
Forum
Replies
Last Post
pirateman
TrailBlazer GMT360/GMT370 (2002-2009) Tech
0
12-30-2012 09:20 AM