Swapped '01 Blazer rear hatch for '01 GMC hatch, harness question
 

My dad's '01 blazer's rear hatch was damaged and the junk yard replaced it with an '01 GMC Jimmy door. It fit on just fine but the 2 harnesses (one on each side, about 7-8 wires each) for the locks, wipers, etc. do not match up. I believe I could cut the harness from the old door and splice it to the GMC door by matching up the colors, but the problem is that all of the colors do not match. 2-3 wires aren't matching up. I was curious if there are diagrams that I could use to confirm which wire does what for both vehicles. Thanks for all your help!