Serviced tranni new fluid/filter
Relpaced shift soleniods in tranni
replaced 4wd switch in dash with new from NAPA store
replaced vacuum switch
checked vacuum lines no atf present
replaced input shaft seal serviced tcase
I need a schematic, wiring diagram or both to check for a bad wire. Any suggestions would be great. I don't want to burn up my tranni.
I think this comes from the previous owner running fuel completely out and smoking the fuel pump. The wire were literally black and the insulation crumbled. Lucky there was no exsplosion.
Serviced tranni new fluid/filter
Relpaced shift soleniods in tranni
replaced 4wd switch in dash with new from NAPA store
replaced vacuum switch
checked vacuum lines no atf present
replaced input shaft seal serviced tcase
I need a schematic, wiring diagram or both to check for a bad wire. Any suggestions would be great. I don't want to burn up my tranni.
I think this comes from the previous owner running fuel completely out and smoking the fuel pump. The wire were literally black and the insulation crumbled. Lucky there was no exsplosion.
