Blazer Forum - Chevy Blazer Forums

Blazer Forum - Chevy Blazer Forums (https://blazerforum.com/forum/)
-   Off Roading (https://blazerforum.com/forum/off-roading-25/)
-   -   ........crap (https://blazerforum.com/forum/off-roading-25/crap-3977/)

Mudvayne 06-16-2006 10:55 PM

........crap
 
Thats pretty much what i said only not in those exact words. During this outing I decided to go through what everyone else was passing up. So I think " other trucks here, we got a strap, no problem"

So I go charging my way in and get about halfway. This one flooded the drivers floor area and half of the rear carpet, the little door by the back seat was full of water and the puddle took a friends phone away from her :(. I will get through it someday, just gotta wait a while for the floors to dry and the smell to go away. stuck again...


user 1016 06-16-2006 11:24 PM

RE: ........crap
 
oops.......sometimes our 4wd eyes are larger than our tires....ah well....you had fun right???

Mudvayne 06-17-2006 07:45 PM

RE: ........crap
 
I always have fun, I just wish I could go through alot more than ccurrently possible. I ended up seeing some nice lifted blazers today, so I am gunna try and get a lift kit in the future. I would like some 33's at least.

SniperX13 06-18-2006 12:09 AM

RE: ........crap
 
damn..... I know that 4feet is exactly the the window line on my blazer..... I so cannot wait till I afford to start lifting her.....


hope she gets cleaned real good, and then wait for the water to subside a bit, then have a go again at her..... just don't take the same line again!

Mudvayne 06-18-2006 01:02 AM

RE: ........crap
 
My biggest prblem that i have is I actually swamp the engine out quite frequently. I have gone through so many air filters. I have a pic of my airbox full of water up to the filter. So I have to come up with some type of different intake setup. Its tight in the engine bay though. I will come up with something. If any1 has any ideas I am all for it. Just no pics of expensive setups or one with hoels in the fenders. Im not spending or cutting alot :)


The idea I have now is find some type of intake box that will fit in the same spot, but has the opening facing backwards instead of right behind the headlamp. The from thier I can rout it up near the cowl area.

SniperX13 06-18-2006 09:46 AM

RE: ........crap
 
Just make a snorkel like the Humvee's use, and have it pop out the top of the hood, kind of like a velocity stack :)

ceanern 06-18-2006 12:07 PM

RE: ........crap
 
Was gonna say snorkel too. What type of blazer do you have?

user 1016 06-18-2006 03:30 PM

RE: ........crap
 
yeah you can get snorkles......then you can go through anything......well as long as ya don't float away....

Hanr3 06-20-2006 02:50 PM

RE: ........crap
 

[sm=ttiwwp.gif]


I give you my two trucks as examples.
Notice the mud line down the side of the door. Yep, door seals work. Nothing inside the truck at all.
http://offroadworld.tenmagazines.com...nr3/117425.jpg

Did yours look something like this?
Notice the door seal?
Notice the mud line on the door? It was just a little deep. Oddly enough my intake, air filter was dry, then again I don't charge into mud holes.[8D]
http://offroadworld.tenmagazines.com...nr3/133224.jpg


Dory 07-31-2006 10:10 AM

RE: ........crap
 
oh ugh! i guess im a neat freak... i like the "im spotless" look. too much work to clean that all out! hahahah


All times are GMT -5. The time now is 04:30 PM.


© 2021 MH Sub I, LLC dba Internet Brands