|
haha thats cool i was just picking,ive been lucky to have never had to add oil in a vehicle before and i sure hope i dont if i find a blazer.my moms rav 4 leaks oil and she has to add quarts left and right,i put some lucas stuff in it the other day,some people say do some dont,i really dont care so i tried it,its pretty thick stuff man.oh my truck leaked from the steering gear box so replaced it and man does it steer better now haha plus i replace the rag joint,that was a pain getting those big rivots out but it worked.yay me.lol dont mean to high jack your thread.yikes
|
Originally Posted by DonL
(Post 699710)
It's under s10 blazer (2nd gen). This is the one for 4wd 4door. There is a separate option for 2wd.
https://cimg7.ibsrv.net/gimg/blazerf...ee47368b6a.jpg |
Originally Posted by Timmins_Jimmy
(Post 699711)
But no option for 2door?
|
Originally Posted by Laura Mason
(Post 709671)
That's what my issue has been... I was fooled into thinking the 6" would work... Now ppl tell me to swap the axles but I don't like the cherokee suspensions... Any other Chevy axles fit do ya know?
80+ jeep wagoneers have front and rear D44s that are the right width. I'm planning on eventually finding a set of tons, and not caring how far the wheels stick out, Texas doesn't have any laws regarding fender coverage |
Wow this thread is awesome. Just read through the whole thing. It's giving me the motivation to rebuild my 4.3 and order a 6" lift kit for my '01 Jimmy. May have to fight some electrical gremlins or do an EGR delete though. Thanks for your build threads, cleburne red and DonL.
|
Any Vids?
Originally Posted by cleburne red
(Post 703743)
So, I had already done some mild trimming, but I was still getting some good rub at the ohv park yesterday.
Now, I disconnect the sway bar when I wheel, I want every bit of articulation I can get; and while I don't do super hard core rock crawling, it's not my daily driver, and I have friends with trailers, so I'm not super afraid of breaking it, either. So ymmv with the amount of trimming vs tire size. This is what I just did, can't really trim much more, I'm up against the firewall. Hopefully it won't rub next time out https://cimg2.ibsrv.net/gimg/blazerf...615fbff0aa.jpg (ignore the oil stains... I'm replacing the front axle seals very soon) It might look excessive, but when the wheels are turned, and you come down off a rock ledge, the gap closes up significantly Very nice build. Do you happen to have any off-roading or general build vids on YouTube? Those tires look mean! |
| All times are GMT -5. The time now is 01:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands