1995 2 door Blazer Dash Board
 

here goes my question everyone , i have a 1995 2 door blazer thats in really good condtion but i have a interior mod question , can i swap out my dash board and put in a new dash board from like a 2000 blazer with out any problems or would i run into a ton off complications like splice wiring , new bolt holes , etc. etc. etc . , or do you think it would fit in the correct way with no mods to it . because techanally the are still almost identicalt inside except for the dash , so if you know anything about this please give me some feedback on it , thank you in advance for all your help guys and gurls , thank you .

RE: 1995 2 door Blazer Dash Board
 

well, off the top of my head, the gauge area is totally different, and the heater controls are as well, along with the Glove compartment and that whole area. Methinks it would be really hard, but anything is possible.

RE: 1995 2 door Blazer Dash Board
 

Someone on s10forum.com is doing that very same thing

http://www.s10forum.com/forum/showthread.php?t=272110

I don't think it's that hard but there is a good bit of work involved