Drip Wetherstrip fun
#1
Drip Wetherstrip fun
**WEATHERSTRIP**
Wife is out of town on business, so I have the house to myself... Aka Garage time!
Decided to install my driver's side drip weatherstrip.
Here's the old one.
On some advice I read on here, I peeled the double sided tape that came on the new weatherstrip, and placed better, thicker tape on there.
Here's what was underneath the old... Lots of goop.
And here's what some mineral spirits and elbow grease will get ya..
Still some black weatherstrip adhesive left that I will finish cleaning off.
I'll post the finishing pics tonight.
Wife is out of town on business, so I have the house to myself... Aka Garage time!
Decided to install my driver's side drip weatherstrip.
Here's the old one.
On some advice I read on here, I peeled the double sided tape that came on the new weatherstrip, and placed better, thicker tape on there.
Here's what was underneath the old... Lots of goop.
And here's what some mineral spirits and elbow grease will get ya..
Still some black weatherstrip adhesive left that I will finish cleaning off.
I'll post the finishing pics tonight.
Last edited by N. Jensen; 05-18-2018 at 09:14 AM.
#2
Here's the finished product;
We'll see how it holds up in the car wash..
We'll see how it holds up in the car wash..
Last edited by N. Jensen; 05-18-2018 at 09:18 AM. Reason: Non spelling error thread deleted, had to repost all pics from that thread.
#7
I have to replace mine again. I got the short strips which fit the front door but I will probably replace with a strip all along the front and rear doors. At the same time have it go as far down along the A-Pillar as it goes.
#9
Need to buy one for my 2001 4dr Blazer. Has turned sticky for some reason. Question about the application. LMC lists 29-7660 for the Blazer and 2 dr PU. They list the 29-7662 for a crew cab or extended cab S10 PU, but no Blazer. Must I assume that the 29-7660 fits the 2dr blazer and the 29-7662 fits the 4 door blazer? Only thing that makes sense to me.... Also they use the same P/N for both sides??