Fender Trimming
#1
01-06-2009 | 05:07 PM
Thread Starter
|
New Member
Joined: Jun 2008
Posts: 71
From:
Fender Trimming
Anyone got anypics of there fender trimming? It would be greatly helpful
#2
01-06-2009 | 09:06 PM
BF Veteran
Joined: Oct 2007
Posts: 3,746
From: Raleigh, NC
RE: Fender Trimming
I can get a pic tomorrow of my trimming, Im kinda suprised I didnt get a pic when I was done cutting...ive got a bunch of before pics...oh well
This gives ya an idea of what youd be needing to trim. These are my 30x10.50s on 4.5' bs rims.
That tab is bent down just from the drive home...it needed some trimming
In the mean time, heres a link to a thread by Jigg about trimming his ZR2 for 33s. Bigger tire, but same concept for running wider tires/rims on a non-z CLICK.
This gives ya an idea of what youd be needing to trim. These are my 30x10.50s on 4.5' bs rims.
That tab is bent down just from the drive home...it needed some trimming
In the mean time, heres a link to a thread by Jigg about trimming his ZR2 for 33s. Bigger tire, but same concept for running wider tires/rims on a non-z CLICK.
#4
01-07-2009 | 03:50 PM
RE: Fender Trimming
I can`t see Jigg`s pix on the ZR-2 site. Is the problem specific to my browser?
#5
01-07-2009 | 07:32 PM
Thread Starter
|
New Member
Joined: Jun 2008
Posts: 71
From:
RE: Fender Trimming
Jiggs triming doesnt look to bad. Now i have a general idea where to start trimming
Thread
Thread Starter
Forum
Replies
Last Post
