PSA Door Spring Tool
#1
PSA Door Spring Tool
For anyone who needs to replace their hinge pins and doesn't have a door spring tool, Harbor Freight sells them for $5.
http://www.harborfreight.com/cpi/cta...emnumber=95344
In my searches, I found links to Eastwood for $20 (http://www.eastwoodco.com/shopping/p...ck+door+spring) and people saying they found them on ebay for $10, so I thought I'd post this for anyone else to find if they need this tool and don't want to pay a lot for a tool they'll only use a couple times.
Search terms: door hinge spring compressor tool sagging
http://www.harborfreight.com/cpi/cta...emnumber=95344
In my searches, I found links to Eastwood for $20 (http://www.eastwoodco.com/shopping/p...ck+door+spring) and people saying they found them on ebay for $10, so I thought I'd post this for anyone else to find if they need this tool and don't want to pay a lot for a tool they'll only use a couple times.
Search terms: door hinge spring compressor tool sagging
#2
RE: PSA Door Spring Tool
Moving to Paint,Body, and Interior.
#3
RE: PSA Door Spring Tool
yep, definitely the lowest cost one I have seen. Nice find!
#4
RE: PSA Door Spring Tool
I used a bunch of zip ties to put mine in
#5
RE: PSA Door Spring Tool
GAH!
I've had springless doors for a few weeks now because I couldn't find the tool anywhere. I even checked harborfreight...
I'll have to go there tomorrow and check again
I've had springless doors for a few weeks now because I couldn't find the tool anywhere. I even checked harborfreight...
I'll have to go there tomorrow and check again
#6
RE: PSA Door Spring Tool
I went ahead and ordered the tool and got it in today. It was about $5 shipping and took about 5 business days. I haven't gone out to put the springs in but I tightened one of them down just to see how well it works. This tool is definitely worth it. Worth every penny and how easily and quickly it works.
Thread
Thread Starter
Forum
Replies
Last Post
azzr2
Steering, Suspension & Drivetrain
6
03-25-2012 04:19 PM
jambalaya
2nd Generation S-series (1995-2005) Tech
6
08-31-2010 12:34 PM