Blazer Forum - Chevy Blazer Forums - Search Results

Community
Search
Search: Posts Made By: summit high
Showing results 1 to 16 of 16
Search took 0.00 seconds.
Replies: 4
Views: 2,434
Posted By summit high

try an air wrench, sometimes that will get it to...

try an air wrench, sometimes that will get it to stop spinning by pulling it faster than you can with a wrench, if it is too loose, the spindle ,may need to be replaced!!!
most of the time they...
Replies: 15
Views: 3,476
Posted By summit high

i would head straight for the starter wires ,...

i would head straight for the starter wires , first of all ! i have seen them get corroided and not make contact, then off to the ignition switch , check fuses , and battery as well. PUT THE T CASE...
Replies: 1
Views: 1,980
Posted By summit high

tryed to put a 76' top on my 86' didnt work !!...

tryed to put a 76' top on my 86'
didnt work !! bolt holes and aglignment pins locations in a different place , so
technically if you wanted to redrill the holes , i believe it would work .
yes...
Replies: 3
Views: 12,435
Posted By summit high

my buddy had one on his (88 ,350 , w/holley tbi) ...

my buddy had one on his (88 ,350 , w/holley tbi)
it has somekind of control box to "tweak " the fuel settings, and he was constantly messing with it , trying to get it to run properlly , (just like...
Replies: 14
Views: 16,287
Posted By summit high

so i dont know how your state im standards are ,...

so i dont know how your state im standards are , but i had a problem with mine (86' 350) w/quadjet . throttle shaft was worn out , (common problem) so i decided to change it out with another carb (...
08-14-2011, 10:54 PM
Replies: 5
Views: 1,246
Posted By summit high

generally the ignition system works or it doesnt!...

generally the ignition system works or it doesnt! sounds like a lack of fuel to me !
have you changed the fuel filter ? possibly a carburetor problem ? partially plugged main jet ?
Replies: 5
Views: 989
Posted By summit high

well if it has an electrical plug ,??? it could...

well if it has an electrical plug ,??? it could be an electric fan?? (didnt think they used them untill the next gen ?? could be aftermarket ?
if it is like it came from the factory , it will have...
Replies: 5
Views: 989
Posted By summit high

before you go buying a condensor , check your...

before you go buying a condensor , check your belt tension, cause that could be causing your squeaking your hearing , also the fact that you say if you put water on it /it works better tells me that...
Replies: 12
Views: 6,056
Posted By summit high

possibly could be a seized trans ! too ( the...

possibly could be a seized trans ! too ( the aluminum box the cable goes to )
maybe thats not whaat they call it ??
mine has also got caught on the inside of the tailgate (some brace ) that i...
Replies: 3
Views: 5,966
Posted By summit high

i am somewhat certain the suburban back glass...

i am somewhat certain the suburban back glass assembly is totally different in EVERY aspect ! and i from what i have seen , NOTHING will interchange !
08-03-2011, 11:03 PM
Replies: 13
Views: 7,583
Posted By summit high

to ;the cackster ' did you ever possibly think...

to ;the cackster '
did you ever possibly think about the spark plugs ? or wires ?
mine (94 s10 w code) has 240 thou on the odometer ,and the last time i changed my plugs and wires (225 thou) the...
08-03-2011, 10:51 PM
Replies: 1
Views: 666
Posted By summit high

you should have 12v at the fuel pump . there are...

you should have 12v at the fuel pump . there are a few poeple that have had issues with the ground wire . i would start there ! its just in front of the rear bumper about in the middle on a...
08-03-2011, 10:47 PM
Replies: 4
Views: 2,576
Posted By summit high

take off the terminal from both sides of the...

take off the terminal from both sides of the battery to ensure they are clean 1st !
then check the connection at the starter, it can get loose or corroded there as well !
then if you are still...
08-03-2011, 10:32 PM
Replies: 3
Views: 817
Posted By summit high

sorry, been really busy , the regulator ,...

sorry, been really busy ,
the regulator , motor assembly is riveted onto the door !
in order to remove it, you must drill out the rivets !
then you can slide the arm out of the track integrated...
07-30-2011, 08:48 AM
Replies: 3
Views: 817
Posted By summit high

i dont have pics BUT ... i done this before on...

i dont have pics BUT ... i done this before on mine .
the arm from the regulator goes in the track attached to the bottom of the window .
i have had to replace the motor on a few of my windows so...
07-30-2011, 08:08 AM
Replies: 1
Views: 378
Posted By summit high

out west :)

hello,
my name is shane ,owner of several blazers .
first off is a old beast ,that looks like it has been through the ringer ,i have kept it in very good working condition though (86 jimmy)

my...
Showing results 1 to 16 of 16


 
Forum Jump

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

© 2021 MH Sub I, LLC dba Internet Brands