Now that I'm finally restoring my Blazer, my next item on the list is the front bumper. When I bought it 13 years ago I noticed the exact center of what's called the chrome face bar, but what we normally call the front bumper, is caved in slightly and rippled. It appears to have taken a low speed impact. It's pushed in enough to have a 3/4" gap between the bumper and the impact strip. The impact strip shows no marks or damage. Here's my dillemma: The two numbers listed for a 2000 4dr 4wd LT are GM1002368 and 15094048. When searching the internet I see GM1002368V, GM1002368N, and GM1002368DSN. Nowhere does it tell me what the difference is between them. Does anyone know? Also some sites list these for LS's, but they don't list them for LT's. Aren't they basically the same? Does anyone know?

 

Although I don't know which is which, I'm 99% sure the difference is one has the the black strip across it, therefore it has holes in the bumper for the strip to attached to.

 

The bottom one looks like mine but when searching there are three different ones that look just like it.

 

What kind of valance do you have?


or


I think Blazen is right. The top valance would be the more religious (holy..get it?!) bumper, and the bottom would be more whole, less holier than thou.

 

Mine's like the white rig.