lifted Zr2 Pics
Just got a stock 2001 Zr2 and Im looking at doing the torsion bar and shakle lift or adding the leaf. If you guys could post up pics of your Zr2 with a lift to give me an idea of what it looks like. Thank you
|
3 Attachment(s)
2inch body, 1.5 crank on the bars and 2inch shackles on 33'sAttachment 32377Attachment 32378Attachment 32379
|
1 Attachment(s)
2" BL, shackles and extra leaf to level out the back. 33x10.5 KM2's. Check my build thread if you want more pics.
Attachment 32373 |
http://i1159.photobucket.com/albums/...h_DSCN5389.jpg
2" shackles in the back to level it out. Still has stock 31" tires |
Did u guys have to do any trimming to fit the 33s
|
1 Attachment(s)
Attachment 32358
2" Body lift 2" Lift keys 2" Short add a leaf 3" lift shackles Roughly 4.5" of lift Stock 31's for now til i can find some 33's |
Originally Posted by Zr2Newbie
(Post 548443)
Did u guys have to do any trimming to fit the 33s
Yes, read my build thread |
8 Attachment(s)
I really like the wheels on your car
I have 2000 Blazer ZR2 with stock wheels but i would like to put 15x7 or 15x8 Rock Crawler and i do not mind using the original31x10.5-15 tire dimension since the tires are wide enough for me But i really like a bit of "lip" on the rims so any know which backspace i can use on a original ZR2 that will allow quite a bit "lip" on the rims like on the 15x7 AR Series D steel wheels with 4 inch backspace adds a bit lip Se the first picture and the red arrow
Originally Posted by PlanB4x4
(Post 548231)
2inch body, 1.5 crank on the bars and 2inch shackles on 33'shttps://blazerforum.com/forum/attach...ine=1478103764https://blazerforum.com/forum/attach...ine=1478103764https://blazerforum.com/forum/attach...ine=1478103764
|
lifted Zr2 Pics
1 Attachment(s)
Hey PlanB4x4
Your Truck looks Great ! Are you able to put your Spare Tire on with that HiLift Jack ? And it looks Longer than the Width of your Truck ? I want to add a 5 Gallon "Jerry Can" and Mount and a HiLift Jack on the Back of my Son's ZR-2. I think I can Mount the Jack along the Bottom of the Spare Tire Carrier in front of the Spare Tire. Just Weld Brackets on where I need them, I will make them "Lockable" too. Here is the Same Picture next to your Truck - Twins ! Timmy |
@PlanB4x4
Made a profile on this forum just to compliment your Blazer. Man that thing is nice!!! (Currently a Colorado owner). |
All times are GMT -5. The time now is 06:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands