transfer case motor
#1
transfer case motor
hi my name is justin and i have a 1997 blazer zr2. Once again another person to have problems with the 4wd. i recently installed a cable and got ride of the diaphram for the front diff. now i cant get my transfer case motor to work, i push the 4hi button and it blinks a few times and goes back to 2hi i can here the clicking in the dash but nolonger hear the tran case engage. ive removed the motor without knowing how to test for codes. my question to any who will answer is. Has any body figured out how to test the motor? any help to solve my 4wd problem is much appriciated. thanks
#2
*Moving to Steering, Suspension, & Drivetrain* - The new member area is for new member introductions.
Have you checked out any of the Tech Article's found in the Tech Article (DIY) Index link in my signature? Specifically the one by error_401 which applies pretty much to all NV233 transfer cases.
Have you checked out any of the Tech Article's found in the Tech Article (DIY) Index link in my signature? Specifically the one by error_401 which applies pretty much to all NV233 transfer cases.
#3
no i havnt and im not really sure how to do that sorry, im a little to new to this forum stuff.
Thread
Thread Starter
Forum
Replies
Last Post
LesMyer
2nd Generation S-series (1995-2005) Tech
38
01-09-2020 11:45 AM
Flyfishen
Engine & Transmission
7
06-18-2019 11:22 AM
bensaintonge
2nd Generation S-series (1995-2005) Tech
4
12-03-2013 08:14 AM
walkingtall
2nd Generation S-series (1995-2005) Tech
3
05-26-2008 07:12 PM