upper ball joints
so i know this is probably an old question but i am changing my upper ball joints again....2 mnths after replacement. I am running about a 2 inch lift stressing the uppers horribly. The question is can i do the ball joint flip without spacers or will i have to modify to get the ball joints to mount up flat to the oe arms. Thanks.
|
Originally Posted by Jimmybuild
(Post 727616)
so i know this is probably an old question but i am changing my upper ball joints again....2 mnths after replacement. I am running about a 2 inch lift stressing the uppers horribly. The question is can i do the ball joint flip without spacers or will i have to modify to get the ball joints to mount up flat to the oe arms. Thanks.
If the ball-joint flip doesn't work you could install the Rough Country upper control arms. This is what I did for my lift. |
420 canadian after taxes new. Ask me how I know lol...
I'm curious about this flip. I've just started to hear about it. are the ball joint locations slightly off center? Will that effect it any? Edit: they deliver to a store close by, I can get the info if you go that route. |
All times are GMT -5. The time now is 07:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands