SFA checklist???
 

I cant seem to find a checklist to do a SFA...So guys who have done it please give me a hand.

I have a set of Dana 44's from a 1980 Wagoner.
What I know I need:
-Springs
-Shackles
-Whatever its called to mount shackle to...lol
-4.10:1 gears
-lockrite locker for rear
-all bearings/seals, and u-joints
-warn manual locking hubs
-shocks with an extra 6" of travel over stock
-brake lines to calipers and rear axles
-new brakes all around(pads, rotors, calipers, shoes, drums, wheel cyl., combi kit, adjusters)
-e-brake cables
-2x4" tubing for front cross member
-custom front D.S. and adapter off spline out put shaft on transfer case

Let me know what im missing

Passenger side flat top knuckle and steering arm to bolt to knuckle along with the stud and cone washers. Astrovan gear box or some other gearbox along with the drag line and ends.

Pitman arm as well, I hear its good to use the same type as your axle. For example jeep axles, use jeep pitman arm. Other than that I would say U bolts and spring plates.