Cragar Soft 8s
 

Hey guys, so I am looking into the Cragar Soft 8s. 15x7" wheels, 5x4.75" bolt pattern, 4.25" backspacing wheels. I'm looking at putting them on my stock 2003 4door 4WD LS blazer. It doesn't have a lift, but am planning on it in the future. I've seen many posts about these wheels, however, am still unsure. It would be greatly appreciated if I get some definite answers if I'll have any problems with these wheels (caliper rubbing, or fender rubbing?)

P.S. My tires will be the stock tire size (235/75/R15) for now. Planning for 30x9.5" tires later on down the road.

Again, any advice would be very much appreciated. Thanks.

Other than sticking out a little further than stock you won't have any issue until you start going up in tire size.

Thank you very much, rexm. :) What are your thoughts if I run the Cragars with the 30x9.5" tires and the rest of the truck stock?

Buddy at work put them on a canyon and the only issue he had was the center caps started rusting rather quick. He took them off and had them stripped and powder coated black.