wheel & drop help 1st gen
 

22x9.5 0 offset and 5.188 backspacing would this work on a 1992 s10 2wd blazer? stock height! any rubbing and would i need to run spacers? what tire size what you suggest.

sorry but im still not understandin all this lol from what ive read it says you want to be as close as 0 offset as u can. im good on that part, but the backspacing i want to be sure of?

anyone?

Thats alot, may need spacers. Definately will look stupid sticking out that far. 9.5 width is too much no matter what offset on a little truck. May wanna try 20x8s instead...