I'm unsure exactly what these are called but I see them from time to time. It's a strip of lights similar to the 3rd brake light that can go between the tailgate and the bumper. What I'm wondering is if that will fit on a 98 blazer and how would you go about hooking them up?
I have completely clear taillights that light up red with my led lights (white when lights aren't on) and would like to put a decal on my third brake light of some kind. However I think that would take away from how much red light the back of my suv is putting out. It has a dark brown/purple hue so at night you can't see it too well. Any thoughts?

BTW- My boyfriend has a 97 2-door Tahoe and I'm wondering if anyone knows if they would fit that too? He has barn doors instead of the tailgate however.

Thanks

fire and ice bar, someone on here just put one on can't remember who it was though..

have you seen the new fire and ice lights?? I`ll try and get the link unless someone else responds first with it..

http://cgi.ebay.com/ebaymotors/60-LINE-OF-FIRE-REVERSE-LED-TRUCK-TAILGATE-LIGHTS-BAR_W0QQcmdZViewItemQQcategoryZ33713QQihZ011QQitem Z320207427154QQrdZ1QQsspagenameZWDVW

Typically they can be purchased to plug into a 4 pin trailer harness. Even if you do not have a trailer harness right now, you should have the wiring stuffed up under your truck to add the plug...

WhiteTieBlackJacket just installed one.

Also Davtak has one on his Blazer. The newest fire and ice ones have red brake lights, white reverse, and amber turn signals.

You should measure up the width of the opening of the tailgate and go from there on getting one, I think you would need to get the 48" one and not the 60" one. The come with a plug to plug into you trailer harness, otherwise you can splice into the trailer harness wiring and hard wire it. Personally I would just splice into the harness wiring and add a secondary plug, that way you can sell off the LED brake light if you dont want it later.

I'd buy the red ones, install nerf bars and put the lights under the doors. My friend has them on the sides of his Dodge Ram. They look pretty awesome.

Anyone know if the break light strip will fit on the old body style? I have a 94 S10 Blazer 2dr 4x4.

Yup, I have one. It's only the brake light though. I have the ultra white APC bulbs as the reverse lights. Check out the pics on my cardomain page. Link is in my sig.

I believe they are made to fit any suv. Just measure it to make sure before you buy it. The 48" one should fit on yours because i believe the 94 and 2000 are similar in size.

The newest fire and ice ones have red brake lights, white reverse, and amber turn signals.


Just ordered one tonight. Hope its as good as it looks.

ORIGINAL: Big E

Anyone know if the break light strip will fit on the old body style? I have a 94 S10 Blazer 2dr 4x4.



Yes it will the old body's have I believe the same amount of gap in the rear!!

Thanks a lot I believe I am going to get the fire and ice one. Where is the cheapest place on the net to find one?

I got minehere (http://stores.ebay.com/Vanhorn-Tint-and-Accessories_W0QQ_trksidZp284Q2em158QQtZkm) on ebay for 75 w/ shipping included
Just dont try to use the adhesive backing when its 20 degrees outside...didnt turn out so well.

Sweet thanks i'll check it out. Yeah I imagine the cold and adhesive don't mix too well.