1994 blazer cpi to carb swap
#2
I'm no expert, but I think everything is too tied together for that to be a simple swap Seems like at the least you would have to come up with some kind of stand alone ignition. The transmission talks to the computer also, so maybe you need to swap in like a 700R4, or manual? Assuming yours has the 4L60E.
Keep in mind, I'm talking straight outta my rear end right now
Edit: why do you want to swap to a carb?
Keep in mind, I'm talking straight outta my rear end right now
Edit: why do you want to swap to a carb?
#3
I am building an autocross vehicle .... just trying to figure out what easiest and cheapest way to go .... swap carb , trans , transfer case or buy high psi external in line fuel pump ... already have access to all parts but got a make sure trans is gona function as it should .... I mean it mite get into 2nd gear
#6
What's wrong with the fuel injection? Without any engine modifications and upgrades, I really doubt you'll make any more power with the carb, and you open up a whole box of worms with figuring out the transmission and ignition
#8
Bowtie Overdrives carries the kits - TV cable to carb, - solenoid's and such to non computer the trans if it's the 7004R
Last edited by odat; 01-13-2019 at 08:28 PM.
#10
You may be right.
My toy was built out of a 1992 GMC Jimmy and it has a 7004R
And I have checked into what he wants to do for my 4X4 RX7toy and if he buys all new parts for engine and trans he is looking at almost a Grand in cost
My toy was built out of a 1992 GMC Jimmy and it has a 7004R
And I have checked into what he wants to do for my 4X4 RX7toy and if he buys all new parts for engine and trans he is looking at almost a Grand in cost
Last edited by odat; 01-13-2019 at 09:18 PM.