4L60E wiring
#1
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
Vehicle: 94 S-10 Blazer 4x4 with 4.3 and 4l60E tranny
I've been having shifting problems (no first, no 4th). Took off the pan, removed the solenoids, tested them. they both WORK (click click). However I couldn't find voltage going to either solenoid (but it still does a 2-3 shift) as I shifted through the gears with the ignition on. What I am looking for is a wiring diagram for the transmission. Unless someone can steer me to a better direction, I am going to try to look for a short or broken wire in my wire harness. I assume the harness goes right to the ECM? And is that behind the dash?
I've been having shifting problems (no first, no 4th). Took off the pan, removed the solenoids, tested them. they both WORK (click click). However I couldn't find voltage going to either solenoid (but it still does a 2-3 shift) as I shifted through the gears with the ignition on. What I am looking for is a wiring diagram for the transmission. Unless someone can steer me to a better direction, I am going to try to look for a short or broken wire in my wire harness. I assume the harness goes right to the ECM? And is that behind the dash?
#2
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
ECM is behind the dash on the passenger side. It's paired with the TCCM.
Thread
Thread Starter
Forum
Replies
Last Post
dj00140
2nd Generation S-series (1995-2005) Tech
22
11-04-2015 05:03 AM
nineteensixtycaddy
2nd Generation S-series (1995-2005) Tech
2
09-12-2010 08:54 PM
an240172
Engine & Transmission
0
09-07-2009 02:58 AM
95blazer8620
2nd Generation S-series (1995-2005) Tech
1
10-19-2007 01:26 PM