Was wondering if anyone out there had the torque specs that I will need for doing a head gasket? If not I'll just use my old noodle.

 

Here's the sequence for the '93 4.3 (W). Don't see why it would be different but if it is, someone could chime in and let ya know:
1) tighten first sequence to 25 ft lbs
2) tighten second sequence to 45 ft lbs
3) final sequence to 65 ft. lbs

 

3 steps,first step torque all bolts to 25 foot pounds,second step,torque all bolts to 45 foot pounds,step 3 torque all bolts to 65 foot pounds.Recheck the final torque of 65 foot pounds