need walkthrough for replacing dipstick tube.
Thread Starter
Joined: Jun 2007
Posts: 3
need walkthrough for replacing dipstick tube.
I need anyone who can to help me figure out how to remove the oil dipstick tube from my 89 chevy blazer w/4.3l v6. I have removed the mounting bolt from the top end which secures to near the valve cover. Now what?
RE: need walkthrough for replacing dipstick tube.
*Moved to General Tech Help - 1st Gen Tech*
I'm trying to think back to my old S10... I had to do this and I believe I just removed that bolt and gave it a tug. I did have to ream out the hole in the block before putting down in the new tube. A small drill bit wrapped with emry cloth and an extension worked like a charm. But don't forget to change the oil afterwords!
I'm trying to think back to my old S10... I had to do this and I believe I just removed that bolt and gave it a tug. I did have to ream out the hole in the block before putting down in the new tube. A small drill bit wrapped with emry cloth and an extension worked like a charm. But don't forget to change the oil afterwords!
Thread
Thread Starter
Forum
Replies
Last Post
bigdaddykane93
Engine & Transmission
1
Oct 29, 2010 03:56 PM
chipjumper
Engine & Transmission
21
Oct 27, 2010 09:31 AM
