This one is boggling me. When I come to a stop at a light or after a few min of warming up my ses light will click on but once i start moving and start crusing the light will kick off. I did the old fashion key method and its kicking out the codes, 22, 34, 35, 43, 44. Has anyone had this happen?

 

Anything that triggers a code will cause the SES light to come on, even if the problem doesn't persist. Stored codes are kept for 50 key cycles, even if they don't reoccur. You might need to clear the codes and start over. Pull the ECM-B fuse for a minute, and then reinstall. If the problem reoccurs, check the codes right away, and repair each code one at a time.