2000 Chevrolet Blazer 4.3L Intake Manifold Gasket Question
#1
2000 Chevrolet Blazer 4.3L Intake Manifold Gasket Question
I just did lower and upper intake manifold gaskets. I got done around 4 how long is safe until I crank it up?
I used the felpro gaskets and black RTV on front and rear. I didnt know how much the rtv controlled anything so I have not cranked it, first time I have done this anticipation is killing me.
ALSO where can I find the L tube for the PCV valve, mine was dry rotted and crumbled in my hands when I removed it. Thanks
I used the felpro gaskets and black RTV on front and rear. I didnt know how much the rtv controlled anything so I have not cranked it, first time I have done this anticipation is killing me.
ALSO where can I find the L tube for the PCV valve, mine was dry rotted and crumbled in my hands when I removed it. Thanks
#2
I like to wait overnight at least.
As far as the PCV hose, the junkyard is going to be the cheapest. Dealer would be the next option.
As far as the PCV hose, the junkyard is going to be the cheapest. Dealer would be the next option.
#3
Oh ok, I looked it up on autozone to N/A. Thanks Swart, I will let it sit until tomorrow and hopefully all is good.
#4
#5
Yes it is...
#6
Ok i go to rockauto.com
type in that part number walah you got a new one
Edit: something better click that link and theirs a tab that says continue shopping
type in that part number walah you got a new one
Edit: something better click that link and theirs a tab that says continue shopping
Last edited by xgiovannix12; 10-31-2011 at 04:11 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ACrepairman
2nd Generation S-series (1995-2005) Tech
4
06-13-2010 08:04 AM
Don,t no much
2nd Generation S-series (1995-2005) Tech
10
01-30-2010 02:48 PM
ldkronos
2nd Generation S-series (1995-2005) Tech
6
05-02-2009 10:53 AM