[Transmission] 99' Blazer - Clunk in 1st around 10mph... transmission?
#1
07-17-2009, 09:05 PM
Join Date: Jun 2009
Location: Crown Point, IN
Posts: 26
[Transmission] 99' Blazer - Clunk in 1st around 10mph... transmission?
1999 Blazer LS - 153k miles.
Here's the issue I'm trying to trouble shoot. The transmission shifts fine and smooth (especially after cleaning the MAF). The fluid is still pink / red and looks full after driven. When I accelerate from a full stop, even if I floor it, the Blazer shifts fine. It isn't until I slow down to about 10mph and press the accelerator that I notice a clank or clunk. If I baby it I don't notice anything.
No SES or codes. Is this a transmission issue, drive shaft issue, or something else?
Placing the vehicle in R usually produces a little more kick then I expect (almost as though 4WD is engaged). Drive is better. The 4x4 won't engage for some reason but it's in 2WD at the moment.
Here's the issue I'm trying to trouble shoot. The transmission shifts fine and smooth (especially after cleaning the MAF). The fluid is still pink / red and looks full after driven. When I accelerate from a full stop, even if I floor it, the Blazer shifts fine. It isn't until I slow down to about 10mph and press the accelerator that I notice a clank or clunk. If I baby it I don't notice anything.
No SES or codes. Is this a transmission issue, drive shaft issue, or something else?
Placing the vehicle in R usually produces a little more kick then I expect (almost as though 4WD is engaged). Drive is better. The 4x4 won't engage for some reason but it's in 2WD at the moment.
Thread
Thread Starter
Forum
Replies
Last Post
stephensh
2nd Generation S-series (1995-2005) Tech
4
09-27-2009 10:06 AM
