In need of help on how to replace front bumper brackets. Original are bent 90° inward. Found the replacements on rockauto but im not sure how to proceed with instillation.
Any help is appreciated.

 

click on this.. ^ .. hope it helps

 

Thanks for the vid, that helps answer a couple of questions.

 

When I replaced them in the past I would cut off the old ones where they were originally welded on the frame and bolt the new ones to the bumper and get the bumper where I wanted it and tack weld them in on the frame. After I was happy with the fit I would take the bumper off and do final welds. Hope that helps.