2000 ZR2 4wd problems
So I have had problems with the 4wd not working on my blazer since I bought it last year. If I had known it was going to be such a pain in the butt to fix I wouldn't have bought it. Anyway my current problem is this:
My inicator light on the dash says the truck is in 2wd but something didn't seem right so I jacked up the rear end and put the blazer in gear. My front axles aren't engaged but the front drive shaft from the transfer case is spinning. What gives.
My inicator light on the dash says the truck is in 2wd but something didn't seem right so I jacked up the rear end and put the blazer in gear. My front axles aren't engaged but the front drive shaft from the transfer case is spinning. What gives.
So I have had problems with the 4wd not working on my blazer since I bought it last year. If I had known it was going to be such a pain in the butt to fix I wouldn't have bought it. Anyway my current problem is this:
My inicator light on the dash says the truck is in 2wd but something didn't seem right so I jacked up the rear end and put the blazer in gear. My front axles aren't engaged but the front drive shaft from the transfer case is spinning. What gives.
My inicator light on the dash says the truck is in 2wd but something didn't seem right so I jacked up the rear end and put the blazer in gear. My front axles aren't engaged but the front drive shaft from the transfer case is spinning. What gives.
https://blazerforum.com/forum/showth...ight=4x4+worky
Dont forget using the search feature can reveal a wide variety of answers! Make sure you give that a shot before posting a thread.
BlazerGuy2001
Thread
Thread Starter
Forum
Replies
Last Post
Blazeme
2nd Generation S-series (1995-2005) Tech
0
Jan 24, 2015 06:08 PM
BLAZE86DUBZ
Engine & Transmission
1
May 11, 2014 03:02 PM
BearingEater
2nd Generation S-series (1995-2005) Tech
2
Jun 17, 2011 03:16 PM
Spectreblazer
Off Roading
43
Feb 13, 2010 04:59 PM





