95 blazer transfer case
#1
95 blazer transfer case
Hey guys,
I have a 95 blazer, and well last winter i snapped something in the transfer case. I am lookin for a used one. but it is not push button it is the manual pull on the floor board. just wondering if any one has a good one or has a diagram so i can try to figure out if it is something i can fix. Any help is great.
thanks,
chris
I have a 95 blazer, and well last winter i snapped something in the transfer case. I am lookin for a used one. but it is not push button it is the manual pull on the floor board. just wondering if any one has a good one or has a diagram so i can try to figure out if it is something i can fix. Any help is great.
thanks,
chris
#2
It's probably just the cable. I'd follow it to see that everything's intact first.
#3
I have. it is something inside the transfer case. it will go into 4 wheel but the drive shaft coming out of the case wont lock. put it in 4 low and can feel the torque. so i know its something that will lock the front drive shaft in inside it. i got stuck in a big snow pile in 2 wheel and not thinking with the back wheel spinning i dropped it in 4 high. i heard something snap. got out of the snow pile and got it out of 4 high back to 2 high and never went back into 4 high.
Thread
Thread Starter
Forum
Replies
Last Post
Flyfishen
Engine & Transmission
7
06-18-2019 11:22 AM
bensaintonge
2nd Generation S-series (1995-2005) Tech
4
12-03-2013 08:14 AM
Bomblowski
1st Generation S-series (1983-1994) Tech
4
10-04-2007 07:12 AM