97 Olds Bravada (S-10 Blazer) Brake Issue
#1
97 Olds Bravada (S-10 Blazer) Brake Issue
The Bravada is the same as an S10 Blazer, but has AWD rather than 4wd.
I have a problem that's just started with the brakes.
When you apply the brakes, it pops the master cylinder cover off. It's just 1 corner, not the whole cover. Hasn't leaked any fluid at all and it still stops, but not the way it should.
The pedal feels spongy, like it needs bled, and there's a sort of hissing sound when you push the pedal.
I'll put the cover right back on, it'll work normal for maybe 4 0r 5 stops, then it pops the cover off again.
Any ideas?
Thanks.
I have a problem that's just started with the brakes.
When you apply the brakes, it pops the master cylinder cover off. It's just 1 corner, not the whole cover. Hasn't leaked any fluid at all and it still stops, but not the way it should.
The pedal feels spongy, like it needs bled, and there's a sort of hissing sound when you push the pedal.
I'll put the cover right back on, it'll work normal for maybe 4 0r 5 stops, then it pops the cover off again.
Any ideas?
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Greenwoodsteve
Paint, Body, & Interior
0
12-04-2016 02:41 PM
SyberTiger
2nd Generation S-series (1995-2005) Tech
1
05-25-2016 05:28 PM
93LT
2nd Generation S-series (1995-2005) Tech
7
01-09-2006 09:25 PM