98 Blazer Suspension Parts Needed
#1
03-22-2012 | 11:30 PM
Thread Starter
|
Beginning Member
Joined: Jan 2008
Posts: 34
From: MASS
98 Blazer Suspension Parts Needed
Any ideas of where to get rear shackles and an upper control arm without having to pay outrageous prices?
#2
03-23-2012 | 12:15 AM
ebay or amazon.....
#4
03-23-2012 | 08:32 AM
Senior Member
Joined: Sep 2008
Posts: 733
From: Snow Hill MD
Rear of rear spring shackles are easily available from Keystone spring (suspension king) Part # M1755 $28 ea includes bushings and hardware +20 shipping for 2 day delivery. There are also MANY sources for upper control arms,do not buy a used one when a new one can be had for under $80
#5
03-23-2012 | 12:14 PM
New Member
Joined: Mar 2012
Posts: 7
nevermind i had the wrong part numbers
Last edited by s10driver; 03-23-2012 at 12:16 PM.
#6
03-23-2012 | 03:59 PM
Suspension lift kit comes with it all 
#7
03-24-2012 | 09:18 AM
Beginning Member
Joined: Jan 2011
Posts: 25
From: The back roads of NW PA
Here is where I got mine. 1969-2000 Chevy / GMC Pickup, Blazer, Jimmy, Suburban (9/16 Bolt) - Rear of Rear Shackle - M1114 | $18.95 I see that they lowered the price since I got mine. Stock replacement, fit good, looked good. If you need the bushing for the spring they have them also. Don't do like I did, make sure to measure the ID of the hole on the spring before you order. Mine was
1 3/4'' they also sell the same bushing that is 1 1/2''.
Since I finished this project I noticed Advance auto sells the spring bushings. The description of the parts does not give the OD of bushing.
1 3/4'' they also sell the same bushing that is 1 1/2''.
Since I finished this project I noticed Advance auto sells the spring bushings. The description of the parts does not give the OD of bushing.
Thread
Thread Starter
Forum
Replies
Last Post
MetalMan390
Steering, Suspension & Drivetrain
7
04-01-2011 01:24 PM
Smitty Smithsonite
1st Generation S-series (1983-1994) Tech
0
10-06-2010 05:29 PM
