blazer got wet now isnt shifting right i need help please!!!
#12
i also put new plugs and wires in
p0306 and p0121
p0306 and p0121
Last edited by swartlkk; 08-03-2010 at 01:28 AM. Reason: *Consecutive Posts* - Please use the edit feature to add more information to your post if another member has yet to reply.
#13
P0121 - Throttle Position Sensor A Circuit Range/Performance (check out P0122 or P0123 for troubleshooting ideas)
P030x - Random/Multiple Cylinder Misfire Detected
The TPS sensor should have a ground, +5V reference, and then the sensor return. The sensor return wire should show ~0.5V at closed throttle and ~4.5V at wide open throttle with the key on, engine off.
P030x - Random/Multiple Cylinder Misfire Detected
The TPS sensor should have a ground, +5V reference, and then the sensor return. The sensor return wire should show ~0.5V at closed throttle and ~4.5V at wide open throttle with the key on, engine off.
Thread
Thread Starter
Forum
Replies
Last Post
BigEffingHammer
2nd Generation S-series (1995-2005) Tech
3
08-27-2014 01:39 PM
bmx4life218
Engine & Transmission
1
07-27-2010 05:35 PM
91s-10blazer
1st Generation S-series (1983-1994) Tech
1
09-01-2009 03:50 PM