I have a 1995 Chevy four-door 4x4, V6 4.3L and the brake booster is shot. Need to replace that booster (with master cylinder and valve attached), and I might as well replace the front discs, back drums and new pads and hardware all around. I also plan on having 20 plus feet or more of brake line to upgrade lines where possible. Truck is stock and intended to be stock but want good quality parts. What manufacturer do you recommend?

Thank you in advance!
Neo

 

I would look into just upgrading to a later 2nd gen all disc break setup... they are better then the disc/drum setup, and can just get heavier duty pads and rotors...