Does anyone make SES AIR injection exhaust manifold block off plates?
#1
03-08-2015 | 05:52 PM
Thread Starter
|
New Member
Joined: Mar 2015
Posts: 8
From: Dearborn Heights, Michigan
Does anyone make SES AIR injection exhaust manifold block off plates?
I'm having a PCM tune done to eliminate SES Air Injection codes (Amongst other things) and I want to eliminate the SES parts. Are there plates available to block off the ports at the front of the exhaust manifolds?
Josh
Josh
#2
03-08-2015 | 07:51 PM
Moderator
Joined: Mar 2009
Posts: 8,453
From: Belleville, Michigan
If the vehicle is registered and licensed to operate on public roads, tampering with the emission control system is against Federal law, and is subject to some serious fines. Unfortunately we can't help you with that.
#3
03-08-2015 | 10:50 PM
Junior Member
Joined: Sep 2010
Posts: 329
besides it being illegal, I haven't heard of any kind of block off plates........I know 96-98 manifolds don't have the provision for the pesky air injection, however that's about all I could tell u.....
#4
03-08-2015 | 11:18 PM
Thread Starter
|
New Member
Joined: Mar 2015
Posts: 8
From: Dearborn Heights, Michigan
Besides what the captain said: I suppose u could always change out the exhaust manifolds to pre 2000? besides it being illegal, I haven't heard of any kind of block off plates........I know 96-98 manifolds don't have the provision for the pesky air injection, however that's about all I could tell u.....
besides it being illegal, I haven't heard of any kind of block off plates........I know 96-98 manifolds don't have the provision for the pesky air injection, however that's about all I could tell u.....
or maybe time for a full exhaust, headers back.
Thread
Thread Starter
Forum
Replies
Last Post
Surgin
2nd Generation S-series (1995-2005) Tech
4
06-22-2011 08:44 PM
SlydinClyde
1st Generation S-series (1983-1994) Tech
5
10-20-2009 12:56 AM