heater core help
#1
I have a 1997 blazer 4dr 4x4. Bad heater core. I pulled the dash and got everything marked and disconnected except the Vaccum lines. I can't seem to figure out how to disconnect the lines. I can't see where the black Vaccum tube that goes into the firewall disconnects from and exactly how to disconnect the white connector with all the other lines going to it. Please help.
Thanks
____________________________ *edit*_________________________
I got the cluster of vaccum lines disconnected finally, I just can't figure out how disconnect the black vaccum line that runs thru the fire wall.
Thanks
____________________________ *edit*_________________________
I got the cluster of vaccum lines disconnected finally, I just can't figure out how disconnect the black vaccum line that runs thru the fire wall.
Last edited by rriddle3; 11-04-2010 at 09:12 PM. Reason: COMBINING CONSECUTIVE POSTS
Thread
Thread Starter
Forum
Replies
Last Post
ssbmx
2nd Generation S-series (1995-2005) Tech
1
12-07-2009 07:48 PM
tdannar
2nd Generation S-series (1995-2005) Tech
16
08-03-2009 08:25 PM
h2recovery
2nd Generation S-series (1995-2005) Tech
6
10-14-2008 12:28 PM
arbowman
General Tech Help
2
10-24-2006 09:15 AM