2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

Help!!

Old Jul 2, 2011 | 05:43 PM
  #1  
Egga13's Avatar
Thread Starter
|
Starting Member
Joined: Jul 2011
Posts: 2
From: Dunedin Florida
Egga13 is on a distinguished road
Default Help!!

Hello All,
I have purchased a 1998 Blazer, RWD, 4 door, with the 4.3 liter V6. I have found a multitude of issues, and I am hoping, someone can point me in the right direction, with the first. I have no heat, and I can only seem to blow air out the vents. When I change the **** to the defrost setting, nothing blows up to the windshield. I know the thermostat was changed before I bought the car, I am not overheating, both my heater core lines are hot, WHERE Do I Begin??
 
Old Jul 3, 2011 | 12:30 AM
  #2  
84BlazerS10's Avatar
Super Member
Joined: Jul 2009
Posts: 1,603
From: Oklahoma
84BlazerS10 is on a distinguished road
Default

Sounds like something is wrong with your blend door.
 
Old Jul 3, 2011 | 04:02 AM
  #3  
chaoticdopey's Avatar
New Member
Joined: May 2011
Posts: 99
From: North Hills, CA
chaoticdopey is on a distinguished road
Default

Originally Posted by 84BlazerS10
Sounds like something is wrong with your blend door.
could be the blend door or it could be a vacuum issue. check all your vacuum lines and make sure there not degrading and falling apart. you can find 2 near the brake booster hose.
 
Old Jul 4, 2011 | 02:49 PM
  #4  
Egga13's Avatar
Thread Starter
|
Starting Member
Joined: Jul 2011
Posts: 2
From: Dunedin Florida
Egga13 is on a distinguished road
Default

Originally Posted by chaoticdopey
could be the blend door or it could be a vacuum issue. check all your vacuum lines and make sure there not degrading and falling apart. you can find 2 near the brake booster hose.
And with your words of wisdom, I found a rotted vacuum line running from the top of the intake, all the way over to the fender, $7.00 for the hose, and I have heat, and defrost again, no more driving blind in the rain. Thanks for the guidance.
 


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:18 PM.