I need help figuring this out....
#1
I need help figuring this out....
When ever I go to start the blazer either in the morning or when (blazer) is hot it doesn't start up on the first shot.
The blazer has a new: distributor, cap & rotor, plugs, wires, starter, Coil(from ebay), and the control module next to the coil (forgot the name of it) and installing that module I did put thermal past on it.
I cannot figure out why it is doing this, I'm leaning towards the coil from ebay.
But this has been happening even before I had or installed all the new parts... so I am at a loss....
Thank You in advance
Jim
The blazer has a new: distributor, cap & rotor, plugs, wires, starter, Coil(from ebay), and the control module next to the coil (forgot the name of it) and installing that module I did put thermal past on it.
I cannot figure out why it is doing this, I'm leaning towards the coil from ebay.
But this has been happening even before I had or installed all the new parts... so I am at a loss....
Thank You in advance
Jim
Last edited by blazerJim1701; 01-16-2010 at 10:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
red1127
2nd Generation S-series (1995-2005) Tech
5
08-01-2014 12:31 PM
jtlockwood88
Steering, Suspension & Drivetrain
2
02-05-2011 07:02 PM