Ignition Harness
#1
10-22-2008, 11:33 PM
Ignition Harness
I'm going to be replacing the ignition harness to fix the passlock/security light issue. BUT...I'm not sure which part exactly I need.
Rock Auto lists all these:
(there were a few other options under 'ignition starter switch', but the first few results are just tumblers...these are all the wiring options)
A little while back I talked to a local Chevy dealer and they have an ignition harness with and without passlock sensor. I'll call again as I don't remember what the prices were.
All this is based on my memory that I only need the wiring harness, not the tumbler itself?
Rock Auto lists all these:
(there were a few other options under 'ignition starter switch', but the first few results are just tumblers...these are all the wiring options)
A little while back I talked to a local Chevy dealer and they have an ignition harness with and without passlock sensor. I'll call again as I don't remember what the prices were.
All this is based on my memory that I only need the wiring harness, not the tumbler itself?
#2
10-23-2008, 10:28 PM
RE: Ignition Harness
So I swung in autozone today...they have the ignition harness for $71. And being duralast, should have the lifetime warranty? I might just do that...
UNLESS SOMEONE RESPONDS WITH SOME INFORMATION.
PLZ?
UNLESS SOMEONE RESPONDS WITH SOME INFORMATION.
PLZ?
Thread
Thread Starter
Forum
Replies
Last Post
Brian5792
2nd Generation S-series (1995-2005) Tech
6
10-24-2018 11:34 AM
DaddysBlazer
2nd Generation S-series (1995-2005) Tech
0
04-21-2012 01:35 PM
Flatearthman
2nd Generation S-series (1995-2005) Tech
2
07-17-2010 05:23 AM
trapper_canada
2nd Generation S-series (1995-2005) Tech
5
08-15-2005 11:33 PM
