Need some help
#1
![Default](https://blazerforum.com/forum/images/icons/icon1.gif)
Hey guys I'm in the process of lifting the ZR2 Blazer. At I tore out the front suspension I tossed out all the old stuff I'm not going to use.
The only problem is I tossed out the inner and outer tie rod ends before I measured them.
I'm making custom replacements and need a measurement from the gease fitting from the inner to the outer on both sides.
If somebody could help me out and measure there's that would help me out allot.
The only problem is I tossed out the inner and outer tie rod ends before I measured them.
I'm making custom replacements and need a measurement from the gease fitting from the inner to the outer on both sides.
If somebody could help me out and measure there's that would help me out allot.
Thread
Thread Starter
Forum
Replies
Last Post
davidluzader
2nd Generation S-series (1995-2005) Tech
2
03-01-2010 10:25 AM
rcravincase
2nd Generation S-series (1995-2005) Tech
1
09-13-2009 07:58 PM
ZLover4Life
2nd Generation S-series (1995-2005) Tech
46
12-22-2008 01:01 AM
scottyk
1st Generation S-series (1983-1994) Tech
5
03-19-2007 11:32 PM