Needh help with Vacuum Line
2002 Blazer LS, 4WD, 4.3L
Spent more time today tracking vacuum lines. I didn't do any work in this area, but I now find a loose vacuum line. I tagged it with a piece of tape (on driver's side). I can see no close place to re-hook it. I need help OR a diagram. Please click on small photo, if it works. Thanks, Joe
Spent more time today tracking vacuum lines. I didn't do any work in this area, but I now find a loose vacuum line. I tagged it with a piece of tape (on driver's side). I can see no close place to re-hook it. I need help OR a diagram. Please click on small photo, if it works. Thanks, Joe
There is a small reservoir in the fender right by the abs bracket. It's hard to see but you can feel the stem it connects to. If it's snapped off then remove the whole thing and get one from a pick-n-pull. It's the black plastic thing between the anti-lock brakes bracket and the cruise control.
Just as you said!! With the aid of a mirror and small flashlight, I found it. It was still intact, so I now have it connected and am looking for other problems. Thanks again for being present when I needed you. Good, Helpful Forum!!! Joe
Thread
Thread Starter
Forum
Replies
Last Post
hohenstein
2nd Generation S-series (1995-2005) Tech
4
Oct 23, 2012 04:40 PM
Nithral
1st Generation S-series (1983-1994) Tech
4
Jan 14, 2012 10:32 PM
civiCholo
2nd Generation S-series (1995-2005) Tech
1
Nov 28, 2009 06:31 PM
igot10pinitis
2nd Generation S-series (1995-2005) Tech
6
Apr 10, 2009 09:38 PM




