New on here and 4x4 engaging problems
#11
i would untape them and put them back on the solenoid until you can change to a new solenoid....Unless you still have snow where you are and want to use 4x4.....the front axle will be locked with the 2 lines together...harder on gas.
#12
Ok I will check that tommorow and see what it's doing , if it is still drawing vaccum could that harm anything, I was just so excited it was working again I left it taped together but will be ordering a new solenoid and thanks everyone for all the help !!!
#14
I would like to hear some feedback on the best way to properly level the front of my blazer out ? I'm thinking maybe 1 -1.5" , I m currently running the stock 235-75-15's but would like to go up a size or 2
#17
I have seen that ....I smacked it and it worked for a few more months...My buddy had it on hand by the time it failed again...Dorman was only $58 in Canada so its probably $35 US on your end.