NP8 to NP1 case swap?
#12
Remember this is free software that comes with the OBDLinkSX hardware. Don't pay for the software! Only $29 for the hardware to give it a try.
Last edited by LesMyer; 03-30-2015 at 08:22 AM.
#13
The OBDWiz software is a download that requires the license key you will receive with your hardware. If you are really getting this let me know and I will download it/install it also so I can help you directly. I'm sure I already have the license somewhere. Why? It's interesting to me if the required rudimentary TCCM communication to read and clear TCCM codes can be done with freebie software and a cheap $29 OBD2 device. Might be interesting to others as well and may have applications in other vehicle systems as well.
Last edited by LesMyer; 03-30-2015 at 11:23 AM.
#15
I have been collecting info on the elm 327 commands , It is pretty cool what you can do with them....No more expensive scan unit to initiate the crank sensor relearn....you can do it with elm.
#16
I stumbled across this file the other day - haven't had time or desire to go through it all. Have you seen it?
http://elmelectronics.com/DSheets/ELM327DSF.pdf
#17
Yes , I have that sheet ..looked over it briefly , That is a good idea Les . This weekend I have some work to do on my Astro and Jimmy so I will play around and start a new thread with the info I have and have played with.
Thread
Thread Starter
Forum
Replies
Last Post
LesMyer
2nd Generation S-series (1995-2005) Tech
7
06-05-2024 09:23 AM
LesMyer
2nd Generation S-series (1995-2005) Tech
14
01-26-2024 10:50 AM
five04ever
2nd Generation S-series (1995-2005) Tech
5
11-13-2009 08:03 AM
doodad69
2nd Generation S-series (1995-2005) Tech
11
11-29-2008 03:25 PM