Rear wipper?
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 899
From:
RE: Rear wipper?
ORIGINAL: DCFluX
On the rear wiper arm, there is a rubber cover. Pop it off with a straight screw driver and check that the nut is tight. Apply a new coat of thread locking compound if it is loose. With the blade in the 'Park' position tighten the nut to 23 N-m (17 lb ft). Replace rubber cap.
On the rear wiper arm, there is a rubber cover. Pop it off with a straight screw driver and check that the nut is tight. Apply a new coat of thread locking compound if it is loose. With the blade in the 'Park' position tighten the nut to 23 N-m (17 lb ft). Replace rubber cap.
Today I tried it again and it would barely move so I guess if that doesnt work Ill have to decide if I want to spend the money on one, its not one of those must have things although it is nice.
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 899
From:
RE: Rear wipper?
ORIGINAL: DCFluX
On the rear wiper arm, there is a rubber cover. Pop it off with a straight screw driver and check that the nut is tight. Apply a new coat of thread locking compound if it is loose. With the blade in the 'Park' position tighten the nut to 23 N-m (17 lb ft). Replace rubber cap.
On the rear wiper arm, there is a rubber cover. Pop it off with a straight screw driver and check that the nut is tight. Apply a new coat of thread locking compound if it is loose. With the blade in the 'Park' position tighten the nut to 23 N-m (17 lb ft). Replace rubber cap.
Ill keep ya all updated.
Thread
Thread Starter
Forum
Replies
Last Post
e602
Article Submissions/Discussions
91
Mar 8, 2015 04:53 PM
brino1
Steering, Suspension & Drivetrain
5
Feb 25, 2011 08:05 PM
hcii
2nd Generation S-series (1995-2005) Tech
1
Nov 3, 2010 08:30 AM
