speedometer, odometer and cruise control
BF Veteran
Joined: May 2011
Posts: 2,257
From: SW Central OH
Just pull the VCM Blue connector and ohm it on the pins shown. Should not be a short, should be around 1500 ohms.
Still COULD be mechanically bad even if resistance is right.
BTW: If pulling IP fuse 3 allows dash gauges to work again find the cruise control module and disconnect it from harness, reinstall fuse. If everything still works, replace CC module.
Still COULD be mechanically bad even if resistance is right.
BTW: If pulling IP fuse 3 allows dash gauges to work again find the cruise control module and disconnect it from harness, reinstall fuse. If everything still works, replace CC module.
Last edited by pettyfog; Mar 24, 2012 at 12:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
98BlazerOwner
2nd Generation S-series (1995-2005) Tech
10
Jul 20, 2012 02:06 PM
DKlos
1st Generation S-series (1983-1994) Tech
3
Apr 27, 2011 10:13 PM
moldeck
Tires and Wheels
4
Mar 2, 2010 07:03 AM
Bl4z3r
1st Generation S-series (1983-1994) Tech
1
Feb 10, 2009 08:39 PM
