2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

strange no start problem !! HELP

Old Oct 28, 2009 | 10:01 PM
  #1  
cejay825's Avatar
Thread Starter
|
Beginning Member
Joined: Sep 2008
Posts: 35
From: USA
cejay825 is an unknown quantity at this point
Default strange no start problem !! HELP

OK, have a 1995 blazer (obd 1.5)when you turn the key on, fuel pump will not prime up, has no spark when cranking, and for the kicker, NONE of the dash indicators, airbag, CEL, 4X4 etc. will come on when the switch is turned on. It just truns over. Also when you get in it at night, close the door and turn the key on the overhead interior lights won't go out. Fuel pumps 3 or 4 months old, replaced FPR awhile back, Cap, rotor, plugs all new, checked out all relays and fuses. Yesterday it was running as smooth as glass.I am lost, any ideas, help!!!!!!!!
 
Old Oct 29, 2009 | 06:39 AM
  #2  
rriddle3's Avatar
BF Guru
Joined: Dec 2006
Posts: 6,594
From: Fort Worth,Texas
rriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond reputerriddle3 has a reputation beyond repute
Default

First thing I would do is test the battery and check the cable connections to it to be sure they have not corroded.
 
Old Oct 29, 2009 | 07:52 AM
  #3  
cejay825's Avatar
Thread Starter
|
Beginning Member
Joined: Sep 2008
Posts: 35
From: USA
cejay825 is an unknown quantity at this point
Default

All that is fine, even tried a stronger battery, nothing...
I think its a component somewhere


*Just read a post from Kyle on ignition switches and this sounds very much like my problem. I was thinking either this or the ECM.
Anybody ?????
 

Last edited by cejay825; Oct 29, 2009 at 08:13 AM.
Old Oct 29, 2009 | 08:55 AM
  #4  
LuvMyTJ's Avatar
Junior Member
Joined: Oct 2009
Posts: 271
From: Western New York
LuvMyTJ is on a distinguished road
Default

The ignition switch would be a suspect to me.
 
Old Oct 29, 2009 | 09:07 AM
  #5  
swartlkk's Avatar
Administrator
Joined: May 2005
Posts: 41,334
From: Waterloo, NY
swartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond reputeswartlkk has a reputation beyond repute
Default

x2 on the ignition switch. Sounds like one set of contacts inside is just not doing anything.
 
Old Oct 29, 2009 | 09:46 AM
  #6  
cejay825's Avatar
Thread Starter
|
Beginning Member
Joined: Sep 2008
Posts: 35
From: USA
cejay825 is an unknown quantity at this point
Default

Thanks, will update later
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmac219
2nd Generation S-series (1995-2005) Tech
1
Oct 28, 2012 04:38 PM
floridachevy92
Engine & Transmission
3
Nov 28, 2010 11:44 PM
hakuna matata
2nd Generation S-series (1995-2005) Tech
6
Sep 3, 2008 09:27 PM
Campesino
1st Generation S-series (1983-1994) Tech
5
Oct 9, 2007 03:57 PM
hogspeed
2nd Generation S-series (1995-2005) Tech
17
Aug 6, 2007 07:07 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:57 PM.