Where is the fuel pump oil pressure switch in a 1999 blazer
#3
Thread Starter
Join Date: Dec 2009
Location: WV
Posts: 6

thank you. Do you have any suggestion on my other question??
We have a 1999 blazer that has the fuel pump replaced 3 times in 4 months. the last time we beat on the tank and the truck started now it will not start. We have checked the replays, hot wired the pump and it ran but we have no voltage to the pump with the key on. Any suggestions?
We have a 1999 blazer that has the fuel pump replaced 3 times in 4 months. the last time we beat on the tank and the truck started now it will not start. We have checked the replays, hot wired the pump and it ran but we have no voltage to the pump with the key on. Any suggestions?
#4
Beginning Member
Join Date: Dec 2009
Posts: 13

check out this pic see if it matches your engine.
http://i11.photobucket.com/albums/a1..._Locations.gif
http://i11.photobucket.com/albums/a1..._Locations.gif
#5
Junior Member
Join Date: May 2009
Location: Kansas City
Posts: 301

#6
And parts stores are known for being right! HAHA!!
RonJon is spot on. There is only one oil pressure sending unit (as shown in the image link above) and that does not directly tie into the fuel pump control system like the older models did.
RonJon is spot on. There is only one oil pressure sending unit (as shown in the image link above) and that does not directly tie into the fuel pump control system like the older models did.
Thread
Thread Starter
Forum
Replies
Last Post
bmoehrke
2nd Generation S-series (1995-2005) Tech
2
08-07-2009 03:58 PM
willysboy2001
2nd Generation S-series (1995-2005) Tech
4
07-23-2009 10:21 AM








