Adding Double Din is not hard at all!!!!!!
Good luck with your install.
I don't know why the bezals are so cheap down here. but in nova scotia canada they sell for $25 if you can find one. I do know of one more for sale and i believe they ship all over the world in case any ones looking for one.
vance haynes auto parts
1-800-565-2433
I don't know why the bezals are so cheap down here. but in nova scotia canada they sell for $25 if you can find one. I do know of one more for sale and i believe they ship all over the world in case any ones looking for one.
vance haynes auto parts
1-800-565-2433
Last edited by hfxblazer; Mar 25, 2011 at 07:22 PM. Reason: mistake
actually it is not going well. Best buy sold me the wrong wire kit....... didn't figure it out until after I soldered and shrink tubed the wires...... it said 1998-2008 GM on it.
I don't suppose you measured your straps before you finalized everything........
I don't suppose you measured your straps before you finalized everything........
its in and works. the only thing I did different than you is I soldered everything and put my micro switch for the screen in the dash bezel.
I finally found the right color bezel for my Blazer, going to pay through the nose for it but oh well
. I'm concerned about how difficult a touchscreen navigation Pioneer will be to wire up and how it should be done (connections). Can anyone give me some insight from their installs?
I got my double din dash bezel from a crunched 05 blazer at a junk yard for 20 bux.
I got the double din trim piece from future shop here in Canada. It cost like 20 bux, but all the other ones in stores here were crap.
Go to wall-mart for the wiring harness, comes with antenna adapter for like 12 bux.
Then just a few hours of time and in she goes, and the face plate can still be removed with no issues.
Centering it perfectly was harder though, I still want to move it over just slightly.
I didn't like the look of the mic on the steering wheel so I put it next to the fog light switch; works good, and looks good.
No picture of the GPS receiver but I put it on the dash nicley up against the windsheild can't even see it when driving.
A nice full size screen would have been nice in there...but for 200 bux, brand new in box from best buy, I couldn't pass that up. A full size with navi and blu tooth would have been around 1,000 and i'm in school right now.
I got the double din trim piece from future shop here in Canada. It cost like 20 bux, but all the other ones in stores here were crap.
Go to wall-mart for the wiring harness, comes with antenna adapter for like 12 bux.
Then just a few hours of time and in she goes, and the face plate can still be removed with no issues.
Centering it perfectly was harder though, I still want to move it over just slightly.
I didn't like the look of the mic on the steering wheel so I put it next to the fog light switch; works good, and looks good.
No picture of the GPS receiver but I put it on the dash nicley up against the windsheild can't even see it when driving.
A nice full size screen would have been nice in there...but for 200 bux, brand new in box from best buy, I couldn't pass that up. A full size with navi and blu tooth would have been around 1,000 and i'm in school right now.
Last edited by jpimp; Apr 1, 2011 at 03:21 PM.




