Hi guys I've got a problem. I recently purchased some Xenons and have tried to put them in. I own a 1998 Blazer and am wondering how to get the headlights out so I can pop the bulbs in. I tried but could only get the highbeam bulbs switched. I turned the screw that tilts the headlight towards you, then I slipped the highbeam bulbs in but I cant get to the lowbeams (too hard to get too)

So guys how can I get to the lowbeams to switch bulbs?

Thanks guys for any help.

-Luke

 

Not sure about the '98s, but I have a '99 and there is a release that allows the entire headlight housing to move forward. That make changing the bulb significantly easier.

Good luck to ya!!!

 

you should see 2 black plastic clips holding the light assembly in, pull up on both of those and it will come out

 

Also remember to not touch the glass part of the bulbs. Oils from your hands may shorten the life of the bulb.

 

Binz316 you are my freaking hero man!



THANK YOU!!!