Bet the price is right also

Haha, well, alternator, fan, skid plate, water pump pulley, some misc sensors from a donor motor (spares), some window vent visor thingys, and even a pair of 9005 Cree LED bulbs and their "drivers" I guess you call them (look like HID ballasts) that I plan on putting in the high beams, $35 :D yes, i do love my job

I have had great success with my intrepid fans. Except that time that my controller box melted down.

Yeah I've had so-so experiences in the past with fan controllers, the type that use the probe in the radiator core, on two of the past vehicles that I converted to electric fan. On this truck I'm going to go another route and use a temp switch in the passenger head to be the ground interrupt in the fan circuit so it should be a little more reliable, no computer control to it :)

Well after rain most of last week, and a weekend on the beach with the misses for our anniversary :D I'm back at it. Popped the manifold apart for some cleaning. Taking the upper and lower half to work tomorrow and going to pressure wash them. Cleaned up the spider injector assembly and got it ready for reinstall.

https://blazerforum.com/forum/attach...ine=1399418115

https://blazerforum.com/forum/attach...ine=1399418115

Every day I love my job just a little more :) this came in an 04 today. Good dash bezel, good turn signal switch without rubbed off cruise button lettering, and a NICE steering wheel WITH FACTORY RADIO CONTROLS! I'll be hooking them up to an aftermarket interface for a pioneer deck. Grabbed the clock spring too which will be needed with it for the controls wiring.


https://blazerforum.com/forum/attach...ine=1399477434

https://blazerforum.com/forum/attach...ine=1399477434

https://blazerforum.com/forum/attach...ine=1399477434

Nice find.

At this rate your gonna have a sweet ride soon

got the intake back together this afternoon, ready for install tomorrow!


https://blazerforum.com/forum/attach...ine=1399508735



while I had the throttle body off, I went ahead and did the throttle blade mod

https://blazerforum.com/forum/attach...ine=1399508735



also cut the original mounting brackets off the Intrepid fan and mocked it up on the radiator. after the intake gets installed and the RTV is curing, I'll probably fab up the brackets to hold it in place


https://blazerforum.com/forum/attach...ine=1399508735

https://blazerforum.com/forum/attach...ine=1399508735



still can't believe how snug this thing fits!

https://blazerforum.com/forum/attach...ine=1399508735

starting to look like an engine again :D


https://blazerforum.com/forum/attach...ine=1399637443