Well i was talking with a friend of mine today and he has a set of 37x14.50 swamper boggers he said he would sell me. He ran them on a 79 ford bronco, he says 600-700 dollars. So if i was to put them on should i cut the front fenders a little? More importantly it has a 350/th700r/np208/10-bolt axles i plan on changing the trans and motor but i hope to leave the rest stock.

 

It may not even be necessary to trim the front fenders. The weak link in your drive train is gonna be u-joints and that 10 bolt semi-floater rear end. How long it lives will be dependant on how hard you use the go pedal.

 

....Well i have good news and bad news, good news is the blazer does awesome one wheel burnouts.....the bad news is in the process i blew the rear dif up and cracked the housing.....so im on the hunt for a 14-bolt..and untill then im probaby going to patch the rust while its out of comission my grandpa is awesome with sheetmetal and whatnot and said he would help me build patch panels i am also probably going to strip the seats and carpet and check the floors out....cya