john you need the front acutator cable thingy? I have mine that i dont need since i ripped out the 4x4. NOT sure if it works at all since my 4x4 didnt work to begin it. well it would go in 4x4,but was a pain to get it back out into 2wd. If you wanna pay shipping its yours.

 

its ok chris i can get a new one for 18 bucks aint that bad =P thanks tho hope i can get it done before winter/snow comes



i was going to put a mack bull dog i took off one of my pops trucks but i never got the chance too lol maybe when i got time

 

She's lookin good man. I agree that yours is one of the best lookin 1st Gens.

If you get a chance check out my thread (i'm a moron and posted it in the sights and sounds section D'oh). Let me know if you have any ideas/suggestions for mine

 

thanks will do =)

 

small update

i added some rear id lights under the tire I like how they came out =)


Now to fix my problem when it rains and my 4x4 before it snows. I wish money grew on trees =(

 

^^^ Very smexy

I wish money grew on trees too.....

What's the 4x4 problem and rain problem?

 

need to replace the cable to the front axle

and when it rains the truck sorta makes a tapping noise coming from the tailpipe and the motor wont go over 2000 rpms

I do have delco ignition products accept the icm and the wires
i think the icm is messing with the timing when wet

whats weird is that when the engine warms up it gos back to normal also if i pull over and shut the truck off then start it it stops then starts again till warm or driven a few miles

ALSO my intake rubber has a crack underneath it and i think its taking in moister so that might be it also

 

intake rubber? you mean the line that runs from your air filter box to the throttle body?


I bet its that icm. Or could be moisture is getting in the dis cap. Test it! wait till a rainy day and pop open the cap and wipe it with a rag. See if it runs fine.

 

yea the one that goes from the plastic into the intake on a vortec

and the caps snug i dont see how moister can go in but yea ill try it also whats the round thing that plugs into the icm ? can that be it also ?

 

yea that wouldnt cause any issues. Try running some seafoam, that stuff does wonders. and fix my ball joints.